Mega-Coupler, Black Anodized

(No reviews yet) Write a Review
MSRP: $26.75
$20.60
(You save $6.15 )
SKU:
016411

Product Overview

The Mega-Coupler has a 1/2″ × 1 1/4" Hex Head Bolt with The Light Source Wing Nut.

Our Mega-Coupler has solid nut tabs that won’t break off. It uses standard 1/2 inch by 1-1/4 inch long hex head grade 8 bolts to secure your load. The bolt head locks into the hex milled pocket so that you can tighten the nyloc nut while the clamp is installed. The Mega-Coupler fastens from (1-1/4" Pipe) 1.66" OD to 2 " OD truss tube and has the industry compatible 14 mm thick base.

Mega-Coupler Options -

1/2″ × 1 1/4" Hex Head Bolt with Nylock Nut (Standard Mega-Coupler pictured above)
1/2" countersunk (CS) flat head bolt (see Mega-Coupler with Flat Head Bolt.)
3/8" countersunk (CS) flat head bolt (see Mega-Coupler with Flat Head Bolt)
3/8″ × 1″ Hex Head Bolt (3/8)
1/2″ × 1 1/4" stainless steel (SS) bolt
1/2″ × 1 1/4" steel wingnut (SW)

Minimum Size
1.25" pipe, 1.66" OD pipe

Maximum Size
1.5" pipe, 1.90" OD pipe, 2" OD truss tube

Working Load Limit

1,100 lb 500kg

Hardware

Standard hardware -
1/2-13 × 1 1/4" Hex Head grade 8 zinc plated steel bolt with nylock nut
1" Belleville Washer

Weight
1.2 Pounds

Part Number
MLB

Reviews

(No reviews yet) Write a Review